Other manufacturers with similar products
KME
23 EPDs
Feralpi group
25 EPDs
Hydro Aluminium
37 EPDs
EPD: Cold rolled steel coils, 0.4-3 mm, 7850 kg/m3, Indaten® (ArcelorMittal Europe)
This Environmental Product Declaration refers to Cold Rolled Steel Coil, Slit Coil and Sheet including Indaten® weathering steel, consisting of carbon steel. The EPD results reflect the volume weighted average of these products. Cold Rolled Coils are produced in ArcelorMittal cold rolling mill in which Hot Rolled Steel coils are continuously rolled between a series of stands of rotating cylinders, and then annealed, either on a continuous annealing line or on batch annealing facilities. Alloy composition and process parameters are set to guarantee the required grade. The coils are then delivered to manufacturers for shaping into end products to be included in building works, generally to precise dimensions, thereby avoiding losses on the construction site. Mean thickness value is at 1.5 mm but the declaration covers the whole range from 0.4 mm up to 3 mm. Width range is from 30 mm up to 1880 mm. For the use and application, the product has a performance taking into consideration EN 10130:2006 - Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions or EN 10268+A1:2013 - Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions. For the application and use the respective national provisions apply. Indaten® cold rolled steel offers improved resistance to atmospheric corrosion. Despite not being covered by a specific European standard, it is a thin gauge version of the hot rolled steel defined in the EN 10025-5:2019 - Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance for Indaten®. It is a fine-grain, high-strength structural steel that has been optimised to give improved processing and inservice performance.
germany