Manufacturer page.

Jotafloor PU Universal is a two component aromatic isocyanate cured polyurethane coating. It is a high performance, solvent free product. It is a self levelling product leaving a seamless surface. It is flexible, abrasion, impact, chemical and slip resistant. It is specially designed to be used as a waterproof membrane. If enhanced slip resistance is required, Jotafloor Non Slip Aggregate can be used in the system. The declared product is to be used as mid coat as part of a complete system in atmospheric environments. It is suitable on approved primers on concrete substrates, and for a wide range of floors with various levels of mechanical and chemical exposure. Jotafloor PU Universal is specially designed as a part of the traffic deck system for heavy duty traffic, for areas such as ramps, car parks, parking bays, pedestrian walkways, roof decks and industrial floors. It is recommended for cold stores, laboratories, hospitals, food and beverage plants, kitchens, high tech manufacturing facilities and dairies. It is also recommended for warehouses, factories and hangars. Technical data: Product mixing ratio (by volume): Jotafloor PU Universal Comp A: 4.4 parts Jotafloor PU Universal Comp B: 1 part Density comp A: 1.5 1.55 g/cm³ Density comp B: 1.23 g/cm³ Solids by volume: 99 ± 1 % Dry film thickness: 500 3000 μm Wet film thickness: 505 3030 μm Theoretical spreading rate: 1.98 0.33 m²/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping.