Other manufacturers with similar products
HEMPEL
27 EPDs
Sika
259 EPDs
Carlisle
165 EPDs
EPD: Epoxy-based resin, two component, for electrical insulation, 700 ml, Part A = 1.17 g/ml, Part B = 1.50 g/ml, Mix ratio = 100:142, 1.05 kg/unit (including packaging), Electrical Insulating Resin 4 GS (3M)
The resin is SVHC-free, free of CMR-substances and does not contain isocyanates. 3M Scotchcast Electrical Insulating Resin 4 GS is classified as Low voltage Insulation Water curable (L-I-W), Low voltage outer protection Water curable (L-OP-W) and Medium voltage outer protection Water curable (M-OP-W) according to IEC 60455-3-8. The products is classified under code 34790 Other plastics in primary forms; ion exchangers in the United Nations Central products Classification (CPC) System. Depending on its application, the products covered by this Environmental products Declaration can be considered a Construction products as per the definition in European Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of Construction products. This regulation defines Construction products as any products or kit which is produced and placed on the market for incorporation in a permanent manner in Construction works or parts thereof and the performance of which has an effect on the performance of the Construction works with respect to the basic requirements for Construction works. Because Construction works are in this same regulation defined as buildings and civil engineering works 3M Scotchcast Electrical Insulating Resin 4 GS can be considered a Construction products and consequently, PCR 2012:01 v2.2 and EN 15804:2012+A1:2013 apply. It is important to note that due to the absence of so-called harmonised technical specifications, the requirements for CE marking and declaration of performance as described in the same regulation do not apply.
belgium, 
italy