Manufacturer page.

Jotafloor Filler is a two component non shrinking solvent free epoxy filler. It is high strength, providing the abrasion resistance and compressive strength higher than concrete. This product is suitable for properly prepared concrete surfaces. The declared product is recommended as a filler for cracks, blow holes, spalls and other surface imperfections and irregularities in concrete substrates prior to over coating with a suitable coating system. The declared product can be applied with a trowel, putty knife or spatula. Technical data: Product mixing ratio (by volume): Jotafloor Filler Comp A: 1.5 parts Jotafloor Filler Comp B: 1 part Relative density comp A: 1.79 g/cm³ Relative density comp B: 1.74 g/cm³ Solids by volume: 100 % Dry film thickness: 200 3000 μm Wet film thickness: 200 3000 μm Theoretical spreading rate: 5 0.33 m²/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized plastic packaging, including secondary packaging such as pallets and plastic wrapping.