Other manufacturers with similar products
Norfax
22 EPDs
Abstracta
36 EPDs
Sunde
31 EPDs
EPD: EPS insulation panelsfor Swedish market, L= 0.038 m2K/W, R=1 m2K/W, 38 mm (10-400 mm range), 0.893 kg/m2, 23.5 kg/m3, 150 kN/m2, Lambda=0.038 W/(m.K), Jackopor 150 (Bewi Insulation Scandinavia)
Expanded polystyrene (EPS) is a common material used for thermal insulation of buildings, including floors, walls and ceilings. It is a polymer foam, consisting of air-filled polystyrene cells. As 98% of the material is air, EPS provides good insulating properties at a low weight. Other characteristics of the material include low moisture absorption, long service life and high compressive strength. EPS is manufactured through permeating polystyrene beads with pentane, allowing the beads to expand when exposed to steam. This addition of a so-called blowing agent adds 4% - 6% w/w. The expanded polystyrene (EPS) beads are then fed into a block molding machine, where steam and pressure forms large blocks of EPS. The amount of EPS going into the mold 2 3 determines the densitiy of the block, where pressure class 80 provides a density at 80 kN/m , which is approximately 15 kg/m . After molding, the remaining blowing agent, pentane, is aired out and the blocks are cut into the desired shape.
sweden