Manufacturer page.

Mini Pleat filter cells MFC for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. For large volume flow rates and long filter life. Product specification Used as fine dust filters, prefilters or final filters in AHU units; or as particulate filters, main or final filters for highest requirements of air purity and sterility, in areas such as industry, research, medicine, pharmaceuticals, and nuclear technology. Low installation depth due to compact V-design, for systems with high volume flow rates and long filter service lives. Filter media made of high-quality, wet-strength glass fibre papers, with spacers. Optimum pleat position and largest possible filter area allow low initial differential pressures. Mini Pleat filter cells available in usual market sizes, filter groups ISO ePM10, ISO ePM1 (fine dust filters) and EPA, HEPA (particulate filters). Mini pleat filter cells are equipped with a circumferential flat profile seal on the upstream side as standard. Optionally available with test groove seal on the upstream side. Mini Pleat filter cells used as fine dust filters are certified by Eurovent. This EPD declares the environmental data of the product series MFC. The following represents a representative dataset of the default variant MFC- H13-GAL/610x610x292/FNU/OTC/S. Materials kg % Adhesive and sealant 1,54 9,42 Chemical 2,28 13,95 Filter, mineral based 2,87 17,56 Metal - Galvanized Steel 8,70 53,22 Rubber, synthetic 0,03 0,18 Total 15,42 94,33 Packaging kg % Packaging - Cardboard 0,30 1,84 Packaging - Pallet 0,61 3,73 Packaging - Plastic 0,02 0,10 Total incl. packaging 16,35 5,67