Manufacturer page.

The declared product of HIT_FP 700_R is a two component system.The cementitious component (component A) comprises a reactive compound based on cement and water as well as inhibitors, viscosity modifying agents and a biocide. The activator component (component B) comprises of an alkaline activator, water, organic acids, viscosity modifying agents and mineral fillers. Mixing the two components A and B in the static mixerinitiates the curing (hardening) reaction of the cementitious component. During the curing phase, a mechanical interlock is formed between the inorganic binder and the mineral fillers.The system formed during the curing process results in an inorganic microstructure with a hydrate phase assemblage creating the desired design properties (high fire resistance, required bond strength, creep stability) and particular long-term stability. The pre-mixed components and the two-component injection technology exclude dust formation and ensure a proper water-cement ratio during the application of the mortar.Composite foils are used for the two component foil pack of HIT_FP 700_R. This kind of packaging serves the following purposes: waste volume reduction, easy storage and transport, and less packaging material.HIT_FP 700_R is the high performance injectable mortar with approvals for rebar connections.For the placing of the product on the market in the European Union European Free Trade Association EU/EFTA (with the exception of Switzerland)Regulation (EU) No. 305/2011 (CPR) applies. Theproduct needs a declaration of performance taking into consideration the following European Technical Approval ETA 21/0624 and the CE marking. For the application and use the respective national provisions apply.