Other manufacturers with similar products
Isopan
33 EPDs
Isolconfort
34 EPDs
FIBRAN
24 EPDs
EPD: Insulation panel, from polyurethane (PUR), aluminium double faced, R=2.19 m2K/W, L=0.023 W/mK, 59 mm, 2.07 kg/m2, 35 kg/m3, GTE (Stiferite)
Product description / Product definition STIFERITE’S thermo insulation panels are mainly used in the building/construction sector and that of industrial insulation. The panels are made of thermo-setting closed cells polyurethane foam (PU) supplied with various types of flexible facers on both sides of the panel. The nature/type of facer contributes to the performance characteristics of the product and its application. Expanded rigid polyurethane foam is distinguished by its excellent thermo insulation performance, mechanical resistance, workability, lightness, and durability. The performance of STIFERITE’S panels is determined based on the European norm /EN 13165:2012+A1:2015 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification/. This EPD refers to STIFERITE’s GTE average thickness panel, made of an insulation component in polyurethane foam using blowing agent Pentanebased, covered on both sides by multi-layer gas-tight aluminium facers. The gas-tight properties of the facing allow the highest thermal insulation to be achieved and maintained over time. The panel is produced in standard dimensions of 600 x 1200 mm and straight finish edges. On request and for minimum quantities, the panels may be produced in various dimensions, and the edges may be rabbeted along the sides. The surface of the panel may be evened off by sandpaper in order to allow installation to uneven surfaces. STIFERITE GTE panel is produced by a certified company with systems: /ISO 9001/, /OHSAS 18001/, /ISO 14001/ in its entire line of products. Product according to the CPR based on a hEN/:13165:2012+A1:2015 For the placing on the market of the product in the EU/EFTA (with the exception of Switzerland) the Regulation (EU) No. 305/2011 (CPR) applies. The product needs a Declaration of Performance taking into consideration /EN 13165:2012+A1:2015 Thermal insulation products for building- factory made rigid polyurethane foam (PU) products - Specification/ and the CE-marking. For the 3 Environmental Product Declaration Stiferite – Stiferite GTE average thick panel application and use the respective national provisions apply. Application The STIFERITE GTE panel is recommended in flat roof: cold-applied waterproof synthetic or bituminous under-roofing, inverted roof; pitched roofs; ventilated, under sheet-metal; walls: in cavity, application from the inside behind infill elements, ventilated facades; floors and lofts: ground-supported and intermediate landing, radiant floors, industrial floors
italy