Manufacturer page.

Product description / Product definition STIFERITE’s thermo insulation panels are mainly used in the building/construction sector and that of industrial insulation. The panels are made of thermo-setting closed cells polyurethane foam (PU) supplied with various types of flexible facers on both sides of the panel. The nature/type of facer contributes to the performance characteristics of the product and its application. Expanded rigid polyurethane foam is distinguished by its good thermo insulation performance, mechanical resistance, workability, lightness, and durability. The performance of STIFERITE’s insulation panels is determined based on the European norm /EN 13165:2012+A1:2015 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification/. The performance of STIFERITE’s composite panels is determined based on the European norm /EN 13950:2014 Gypsum board thermal/acoustic insulation composite - Definition, requirements and test methods/. This EPD refers to STIFERITE’s RP3 average thickness panel, made of an insulation component in polyurethane foam using blowing agent Pentanebased, covered on both side with gas diffusion tight facing (aluminium foil), and on one side bonded with 13 mm thick plasterboard. The characteristics of the foam and of the facing allow the panel to achieve the best reaction to fire classes that can be assigned to organic materials The panel is produced in standard dimensions of 1200 x 3000 mm and straight finish edges. Upon request and for minimum quantities, the panels may be produced in various dimensions. The surface of the panel may be evened off by sandpaper in order to allow installation to uneven surfaces. STIFERITE RP3 panel is produced by a certified company with systems: /ISO 9001/, /OHSAS 18001/, /ISO 14001/ in its entire line of products. Product harmonized as well in accordance with the CPR as with other harmonisation provisions of the EU/: 3 Environmental Product Declaration Stiferite – Stiferite RP3 average thickness For the placing of the product on the market in the EU/EFTA (with the exception of Switzerland) the Regulation (EU) No. 305/2011/ (CPR) and the following other harmonisation provisions apply. The product needs a Declaration of Performance taking into consideration /EN 13950:2014 Gypsum board thermal/acoustic insulation composite - Definitions, requirements and test methods/ and the CE-marking. For the application and use the respective national provisions apply. Application The STIFERITE RP3 panel is suitable for insulating. Walls and Ceilings applications from the inside.