Manufacturer page.

Product description / Product definition STIFERITE’s thermo insulation panels are mainly used in the building/construction sector and that of industrial insulation. The panels are made of thermo-setting closed cells polyurethane foam (PU) supplied with various types of flexible facers on both sides of the panel. The nature/type of facer contributes to the performance characteristics of the product and its application. Expanded rigid polyurethane foam is distinguished by its goodthermo insulation performance, mechanical resistance, workability, lightness, and durability. The performance of STIFERITE’s panels is determined based on the European norm /EN 13165:2012+A1:2015 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification/. This EPD refers to STIFERITE’s ISOVENTILATO average thickness panel, made of an insulation component in polyurethane foam using blowing agent Pentane-based, coveredon one side with mineral fiber glass and on one side with laminglass and Isoventilato board has two wooden (OSB3) laths along the entire length upper face. OSB3 wooden battens run along the whole length of the panel embedded in the foam. The panel is produced with the standard dimensions of 1200 x 2400 mm and with rabbeted edges on the long sides. The surface of the panel may be evened off by sandpaper in order to allow installation to uneven surfaces. STIFERITE ISOVENTILATO panel is produced by a certified company with systems: /ISO 9001/, /OHSAS 18001/, /ISO 14001/ in its entire line of products. 3 Environmental Product Declaration Stiferite – Stiferite Isoventilato average thickness Product according to the CPR based on a hEN/:13165:2012+A1:2015 For the placing on the market of the product in the EU/EFTA (with the exception of Switzerland) Regulation (EU) No. 305/2011 (CPR) applies. The product needs a Declaration of Performance taking into consideration /EN 13165:2012+A1:2015 Thermal insulation products for building- factory made rigid polyurethane foam (PU) products - Specification/ and the CE-marking. For the application and use the respective national provisions apply. Application The Stiferite ISOVENTILATO panel is suitable for insulating: Pitched roofs: with Isoventilato system, ventilated, under roof tiles, pantiles and sheet-metal Walls: application from the inside or outside, behind the facings