Manufacturer page.

Jotun Durasol 4003 is a lead-free powder coating designed to withstand the most stringent weather conditions and meet industry requirements for high performance and long lasting attractive finishes. This TGIC-free product combines outstanding gloss retention and colour stability properties and ensures highest corrosion resistance levels. The declared product is highly recommended for architectural aluminium extrusions and claddings where climatic conditions put severe strain on exterior surface and where advanced corrosion protection, gloss and color retention are essential. When screen printing or sealants are used, it is advised to run separate trials to ensure compatibility and to meet the required performance criteria. Powder coating is applied in air-and-powder mix in a strictly controlled factory process using electrostatic gun and a high temperature curing oven to create film. Virtually no VOCs are released in the process compared to traditional liquid paints. Unused or oversprayed powder can be recycled with minimal wastage, and disposal is easy and safe. In addition, all Jotun Powder Coatings products are lead-free. Density: 1.2-1.5 g/cm3 Film thickness: 50-70 μm Recommended curing time: 10 minutes Recommended curing temperature: 200 C The most representative and worst case formulation is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average packaging size of a carton box with plastic liner. This product has weathering performance in line with AAMA 2605. The approval is specific to colour and local Jotun Powder Coatings unit. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com. For information on technical data, application and use of the product, see the Technical Data Sheet and the Application Guide for the declared product on www.jotun.com.