Manufacturer page.

STIFERITE s thermo insulation panels are mainly used in the building/construction sector or ustrial insulation. The panels are made of thermo-setting closed cells polyurethane foam (PU) supplied with various types of flexible facers on both sides of the panel. The nature/type of facer contributes to the performance characteristics of the product and its application. Expanded rigid polyurethane foam is distinguished by its good thermo insulation performance, mechanical resistance, workability, lightness, and durability. The performance of STIFERITE s panels is determined based on the European norm EN 13165:2012+A2:2016 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification for polyurethane insulation board and on the European norm EN 13163:2012+A2:2016 Thermal insultaion for building-factory made expanded polystyrene (EPS) products - Specification for polystyrene insulation board. This EPD refers to STIFERITE PENDENZATO CLASS B Average thick panel, made of an insulation component in polyurethane foam using blowing agent Pentane-based, covered on top side by bituminous glass fibers, and on the bottom side of an insulation component in EPS with a slope shape. The panel is produced in standard dimensions of as request by the customers and straight finish borders. The surface of the panel may be evened off by sandpaper in order to allow installation to uneven surfaces. STIFERITE PENDENZATO CLASS B Average thick panel is produced by a certified company with systems: ISO 9001, ISO 45001, ISO 14001 in its entire line of products. For the placing on the market of the product in the EuropeanUnion/European Free Trade Association (EU/EFTA) (with the exception of Switzerland) Regulation (EU) No. 305/2011 (CPR) applies. The product needs a declaration of perfomance taking into consideration for polyurethane side EU 13165:2012+A2:2016 Thermal insultaion for building-factory made rigid polyurethane foam (PU) products – Specification and the CE marking, and for EPS side EN 13163:2012+A2:2016 Thermal insultaion for building-factory made expanded polystyrene (EPS) products– Specification and the CE marking. For the application and use the respective national provisions apply.