Manufacturer page.

STIFERITE S thermo insulation panels are mainly used in the building/construction sector and that of ustrial insulation. The panels are made of thermo-setting closed cells polyurethane foam (PU) supplied with various types of flexible facers on both sides of the panel. The nature/type of facer contributes to the performance characteristics of the product and its application. Expanded rigid polyurethane foam is distinguished by its excellent thermo insulation performance, mechanical resistance, workability, lightness, and durability. The performance of STIFERITE S panels is determined based on the European norm /EN 13165:2012+A1:2015 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification/. This EPD refers to STIFERITE CLASS BH Average thick panel, made of an insulation component in polyurethane foam using blowing agent Pentane-based, covered on the top with bituminized glass tissue bonded to PP and on the bottom with saturated mineral glass tissue. Coating with bituminized glass fibre bonded to PP makes the STIFERITE Class BH panel particularly suitable for installations that require high degree of heat resistance. Stiferite CLASS BH has high compressive strength. The panel is produced in standard dimensions of 600 x 1200 mm and straight finish edges. On request and for minimum quantities, the panels may be produced in various dimensions, and the edges may be rabbeted along the sides. The surface of the panel may be evened off by sandpaper in order to allow installation to uneven surfaces. STIFERITE CLASS BH Average thick panel is produced by a certified company with systems: /ISO 9001/, /OHSAS 18001/, /ISO 14001/ in its entire line of products. For the placing on the market of the product in the EU/EFTA (with the exception of Switzerland) Regulation (EU) No. 305/2011 (CPR) applies. The product needs a declaration of performance taking into consideration /EN 13165:2012+A1:2015 Thermal insulation products for buildingfactory made rigid polyurethane foam (PU) products - Specification/ and the CE-marking. For the application and use the respective national provisions apply.