Manufacturer page.

1. Drawn profiles (3 to 7m length) Round from 5 to 80mm; hexagons from 5 to 65mm. Cut to lengths, for for more details please consult us. 2. Grinded profiles (1.5 to 7m length) Round from 5 to 50mm 3. Peeled bars (3 to 8m length) Round from 20 to 100mm (H9 Tolerance possible) Delivered product may contain many types of alloys, depending on the intended performance and characteristic of the steel product. The main steel grades used, refer to European standards, as follows: EN 10277. The various steel grades are sold as drawn, peeled or grinded profiles, with or without chamfering. ArcelorMittal is also able to provide specific profiles (simple forms). An extensive range of products including: › Low carbon steel for free cutting › Free cutting steel grades for heat treatment › Carbon grades › Alloyed grades. The base material of Bright Bars EAF-base is the wire Rod from EAF route using mainly scrap and DRI. The most common elements are carbon, manganese and silicon. Other elements like copper may be present in the steel. The composition of these elements depends on the steel designation/grade. Manufacture Bright Bars EAF-base Quality and production control: ISO 9001 / ISO TS 16949 (now IATF) / ISO 14001 / ISO 45001 / ISO 50001 / EN 10277 / EN 10204-3.1. Monitoring according to the product standards and certifications.