Other manufacturers with similar products
ArcelorMittal
159 EPDs
Elval Colour
49 EPDs
Salzgitter
24 EPDs
EPD: Steel roof and floor deck using blast furnace (BF) technology, North America average, 7800 kg/m3 (Nucor Corporation’s Verco Decking)
Steel deck is typically manufactured by rolling or otherwise forming light gage steel coils into specific shapes. The coils are either galvanized or uncoated steel to which a coating of paint may be applied. Deck in this EPD represents product manufactured in North America. Typical steel roof and floor deck panels are 0.04 - 0.08 meters in depth and are manufactured from 22-16 gage material. Greater depths and heavier material thicknesses are available. Floor deck panels that are used only as forms are typically shallower and are manufactured from lighter gage material. Steel deck products are defined by the following standards. • ANSI/SDI RD-2017 Standard for Steel Roof Deck • ANSI/SDI NC-2017 Standard for Non-Composite Steel Floor Deck • ANSI/SDI C-2017 Standard for Composite Steel Floor Deck-Slabs The United Nations Standard Products and Service Code (UNSPSC) and the Construction Specifications Institute (CSI) / Constructions Specifications Canadian (CSC) classification identified for steel deck products are: • CSI MasterFormat Code: 05 31 00 Steel Decking
california, USA, arizona, USA