Other manufacturers with similar products
DAFA
21 EPDs
Flügger
89 EPDs
Kiilto
67 EPDs
EPD: Two component epoxy coating, 1.6 kg/l, 74% solids/volume, film thickness dry/wet: 60-250/80-340 micrometers, 12.3-3 m2/l, Amine cured, manufactured in China, Penguard HSP ZP E (Jotun)
Product description: Penguard HSP ZP E is a two component amine cured epoxy coating. This product is LEED compliant and contains no solvents on the Hazardous Air Pollutants (HAPs) list. It is a fast drying, zinc phosphate pigmented, high solids, high build product. This product is specially designed for new construction where short dry to handle and over coating times are required. Penguard HSP ZP E is to be used as a primer in atmospheric environments. The declared product is suitable for properly prepared carbon steel substrates. It is suitable for structural steel and piping to be exposed to corrosive environments. The product is recommended for power plants, airports, buildings, refineries and mining equipment, and is designed as a primer for Jotuns Steelmaster intumescent thin film passive fire protection coatings.Technical data: Product mixing ratio (by volume): Penguard HSP ZP E Comp A: 4 parts Penguard HSP E Comp B: 1 part Density: 1.6 kg/l Solids by volume: 74 ± 2 % Dry film thickness: 60 250 μm Wet film thickness: 80 340 μm Theoretical spreading rate: 12.3 3 m2/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com. For information on technical data, application and use of the product, see the Technical Data Sheet and Application Guide for the declared product on www.jotun.com.
china