Other manufacturers with similar products
Knauf
1294 EPDs
Schneider Electric
239 EPDs
Würth
56 EPDs
EPD: Two component injectable mortar, 1710 kg/m3, HIT-MM PLUS (Hilti AG)
The declared product of HIT-MM PLUS is a two-component system. The resin component (component A) comprises a resin based on methacrylate as well as mineral and cementitious fillers. The curing agent component (component B) comprises peroxide hardener, water and mineral fillers. Mixing the two components A and B in the static mixer initiates the curing (hardening) reaction of both binder systems. During the curing phase, a very strong bond is formed between the organic and inorganic binder matrix. The hybrid system formed during cement and resin curing results in a crosslinked duromer with desired design properties (high bond strengths within a short curing time) and particular durability. Composite foils are used for the two-component foil pack of HIT-MM PLUS. This kind of packaging serves the following purposes: waste volume reduction, easy storage and transport, and less packaging material. Through legislation and increased public awareness users have increasingly become discerned towards the use of styrene and other highly volatile components with their resulting unpleasant odour and low flash point (flammability). The reaction resins used in all Hilti hybrid adhesives contain no styrene, are practically odourless and have a considerably higher flash point, i.e. higher than 100 °C in comparison to 34 °C for styrene based products. HIT-MM PLUS is a premium performance injectable hybrid mortar with approvals for rebar connections and heavy-duty anchoring. For the placing of the product on the market in the European Union European Free Trade Association EU/EFTA) (with the exception of Switzerland) the Regulation (EU) No. 305/2011 (CPR) applies. The product needs a declaration of performance taking into consideration the following European Technical Approvals ETA 16/0239 ETA 17/0199
lichtenstein