Manufacturer page.

Pilot WF Alu is a one component water borne acrylic emulsion coating. It is a versatile, fast drying product for exterior and interior use. It has an aluminum finish, and good color and gloss retention. This product can dry down to 50 °F (10 °C). It is ideal for new construction or maintenance where fast dry to handle and over coating times are required. The declared product is to be used as topcoat in atmospheric environments. It is part of a complete water borne system with a recommended Jotun water borne primer. Protective: Suitable as topcoat in systems for a wide range of industrial structures, structural steel, piping and concrete in corrosivity categories up to very high C5 (ISO 12944-2). Recommended for refineries, power plants, bridges and buildings. Recommended for accommodation and working spaces. Density: 1.1 kg/l Solids by volume: 35 ± 2 % Dry film thickness: 30-70 μm Wet film thickness: 85-200 μm Theoretical spreading rate: 11.7-5 m2/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com. For information on technical data, application and use of the product, see the Technical Data Sheet and Application Guide for the declared product on www.jotun.com.