Manufacturer page.

Pilot WF Primer is a one component water borne acrylic emulsion coating. It is a versatile, fast drying product for exterior and interior use. This product can dry down to 41 °F (5 °C). It is ideal for new construction or maintenance where fast dry to handle and over coating times are required. The declared product is suitable as primer or mid coat in up to moderately corrosive environments. Suitable for properly prepared carbon steel, stainless steel, aluminum, galvanized steel, shopprimer steel, concrete and a range of aged coating surfaces. This product is part of a complete system which is certified not to spread surface flames. Protective: Recommended as primer or mid coat for a wide range of industrial structures e.g. airports, buildings, bridges, refineries, petrochemical and chemical plants, accommodation and working spaces. Marine: Recommended as primer or mid coat for accommodation and engine rooms. Density: 1.3 kg/l Solids by volume: 46 ± 2 % Dry film thickness: 80-150 μm Wet film thickness: 175-325 μm Theoretical spreading rate: 5.8-3.1 m2/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com. For information on technical data, application and use of the product, see the Technical Data Sheet and Application Guide for the declared product on www.jotun.com.