Manufacturer page.

Penguard HSP MIO E is a two component amine cured epoxy coating. This product is LEED compliant and contains no solvents on the Hazardous Air Pollutants (HAPs) list. It is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Can be used as primer or mid coat in atmospheric environments. It is specially designed for new construction where short dry to handle and over coating times are required. The declared product is suitable for properly prepared aluminum, carbon steel, galvanized steel, shop primed steel and stainless steel substrate. It is suitable for structural steel and piping to be exposed to corrosive environments, and recommended for power plants, airports, buildings, refineries and mining equipment. Product mixing ratio (by volume): Penguard HSP MIO E Comp A: 4 parts Penguard HSP E Comp B: 1 part Density: 1.7 kg/l Solids by volume: 75 ± 2 % Dry film thickness: 60 250 μm Wet film thickness: 80 335 μm Theoretical spreading rate: 12.5 3 m²/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping.