Manufacturer page.

The new generation of dormakaba SVP emergency escape locks is ideally suited for use in emergency exits and escape routes, as well as in fire and smoke doors. Any door can be safely protected with the emergency escape function and the self-locking action. SVP 2000: Motor lock with electrical process control for increased protection LED displays the status of the lock Feedback contacts for status monitoring of latch, bolt cylinder and handle Simple integration in door management systems or access controls through operational modifications DCW® bus, CAN bus or stand-alone mode autonomously or with control unit for additional functions Direct connection e.g. via the integrated BUS to dormakaba ED revolving door drives or a SafeRoute escape route security system SVP 2000F: Same function as SVP 2000, additionally certified for the use in fire and smoke doors With integrated power reserve module (PR module) inside the lock body for a safe reclosing in case of power loss SVA 2000: Same function as SVP 2000, but for active leaf of double doors Direct bus connection to SVI 2000 F for a fully motorized two leaf door SVA 2000F: Same Function as SVP 2000 F, but for the active leaf of double doors Direct bus connection to SVI 2000 F for a fully motorized two leaf fire / smoke door SVI 2000F: Self-locking motor lock for the passive door leaf of fire and smoke doors With integrated power reserve module (PR module) inside the lock body for a safe reclosing in case of power loss Status message for lock rod and lever handle Integrated LED with status display for maintenance/error display Operation modes: Analogue with control unit, via DCW(r) or CAN-BUS or autonomously without control unit With top and bottom rod lock systems For the placing on the market of the product in the European Union/European Free Trade Association (EU/EFTA) (with the exception of Switzerland) Regulation (EU) No. 305/2011 (CPR) applies. For the use and application of the product the respective national provisions at the place of use apply. The standards which can be applied are the following: EN 179 EN 1125 EN 12209 EN 14846 Restriction of Hazardous Substances (RoHS)