Manufacturer page.

Jotamastic 80 E is a two component polyamine cured epoxy mastic coating. This product is LEED compliant and contains no solvents on the Hazardous Air Pollutants (HAPs) list. It is a surface tolerant, high solids product. Specially designed for areas where optimum surface preparation is not possible or desired. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. The declared product is primarily designed for maintenance and repair. Only aluminum containing versions is to be used in immersed environments. It is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Product mixing ratio by (volume): Jotamastic 80 E Comp A: 7 parts Jotamastic 80 STD Comp B: 1 part Density: 1.53 kg/l Solids by volume: 80 ± 2 % Dry film thickness: 75-200 μm Wet film thickness: 95-250 μm Theoretical spreading rate: 10.7-4 m2/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com.