Other manufacturers with similar products
Kiilto
67 EPDs
Jotun
599 EPDs
DAFA
21 EPDs
EPD: Matt paint for interior application, 1360 kg/m3, 41% solids, 8 m2/l, Perform 7 white, Perform 7 base-3, Perform 7 base-4, Perform 7 offwhite, Perform 7 eggshell, Perform 7 eggwhite (Flügger Group AS)
The following products are covered by this EPD: Flügger Perform 10 White, Flügger Perform 10 Base 3, Flügger Perform 10 Base 4, and Flügger Perform 10 Offwhite. Flügger Perform 10 assortment is an especially designed set of interior wall paints with distinct gloss. Recommended for rooms with normal functional requirements that are exposed to dirt, wear, and tear due to use. D-023 PRODUCT APPLICATION Flügger Perform 10 assortment can be applied on top of new and already painted interior surfaces of most substrates, such as concrete, lightweight concrete, plaster, brick, gypsum boards, fiber plaster, cement fiber broads, and cement particle boards. Flügger Perform 10 can be applied by brush, roller, or spray. It is recommended to decide the corresponding tool depending on the finish. Apply wet on wet and finish by brushing/rolling in the same direction. Always use the same batch number on contiguous surfaces. Differences in surface structure can result in colour deviation. Cold and heat can affect the viscosity of the material. Material temperature for spray painting should be min. 12⁰C. Condensation during drying/curing must not occur. Cold and increased humidity extends drying time, full curing, and recoat interval. Increased temperature and low atmospheric humidity reduce drying time and full curing. Always perform a test treatment for a check and acceptance of adhesion and result.
denmark