default-material
Material Image

Other manufacturers with similar products

Teknos logo

Teknos

45 EPDs

Jotun logo

Jotun

599 EPDs

DAFA logo

DAFA

21 EPDs

EPD: Matt paint for interior application, 1340 kg/m3, 41% solids, 8 m2/l, Perform 10 white, Perform 10 base-3, Perform 10 base-4, Perform 10 offwhite (Flügger Group AS)

The following products are covered by this EPD: Flügger Perform 10 White, Flügger Perform 10 Base 3, Flügger Perform 10 Base 4, and Flügger Perform 10 Offwhite. Flügger Perform 10 assortment is an especially designed set of interior wall paints with distinct gloss. Recommended for rooms with normal functional requirements that are exposed to dirt, wear, and tear due to use. D-023 PRODUCT APPLICATION Flügger Perform 10 assortment can be applied on top of new and already painted interior surfaces of most substrates, such as concrete, lightweight concrete, plaster, brick, gypsum boards, fiber plaster, cement fiber broads, and cement particle boards. Flügger Perform 10 can be applied by brush, roller, or spray. It is recommended to decide the corresponding tool depending on the finish. Apply wet on wet and finish by brushing/rolling in the same direction. Always use the same batch number on contiguous surfaces. Differences in surface structure can result in colour deviation. Cold and heat can affect the viscosity of the material. Material temperature for spray painting should be min. 12⁰C. Condensation during drying/curing must not occur. Cold and increased humidity extends drying time, full curing, and recoat interval. Increased temperature and low atmospheric humidity reduce drying time and full curing. Always perform a test treatment for a check and acceptance of adhesion and result.

Manufacturer legal entity:
Flügger Group AS
Manufacturer:
Country of manufacturer:
denmark country flagdenmark
Product name:
Matt paint for interior application
Commercial names:
Perform 10 white, Perform 10 base-3, Perform 10 base-4, Perform 10 offwhite
Material type:
Coatings and pastes
Material subtype:
Paints, coatings and lacquers

Environmental & technical characteristics

Global warming potential (A1-A3):
1.96 kg CO2e/kg
Technical specification:
1340 kg/m3, 41% solids, 8 m2/l
Available units for calculation:
kg, ton, m3
Unique identifier (OCLID):
62b7ffb50495f217cad2b480

Sustainability data background information

EPD number:
S-P-05883
EPD program:
International EPD System
Publication year:
2022
Product category rules (PCR):
PCR 2019:2014 Construction products, version 1.11 (2021-02-05)
Environmental standard:
EN15804+A1, EN15804+A2
Verification status:
Third-party verified (as per ISO 14025)
Upstream database:
ecoinvent