EPD: Spray polyurethane foam insulation for closed cell, with HFO blowing agent, 0.022 W/mK, 32 kg/m3 average density, SealTite CC+, Walltite HFO, Walltite CMxx lines, Heatlok®HFO High Lift, Heatlok® HFO Pro, Ultra-Thane 200, UPC 2.0 HFO, GacoOnePass Low GWP, ProSeal HFO™, FOAM-LOK® FL 2000-4G, JM Corbond IV, InsulStar®, InsulBloc®, Nexseal™ 2.0, Nexseal™ 2.0 LE ) (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray polyurethane foam (SPF) is made on the jobsite by combining polymeric methylene-diphenyl diisocyanate (pMDI/MDI or A-side) with an equal volume of a polyol blend (B-side). Sides A and B react and expand at the point of application in the building envelope to form polyurethane foam. The formed-in-place SPF provides both thermal insulation and air sealing to the building. Four classes of SPF with varying performances and applications are assessed in this declaration. Closed-cell spray foam for roofing systems (Roofing) is used on the external surface of low slope roofs. Its higher density provides additional compressive strength needed for roofing applications. Closed-cell, or medium density foam, (ccSPF) provides a water-resistant insulation, air-sealing, water vapor control and delivers added structural performance to the building envelope. Open-cell low-density spray foam (ocSPF) provides insulation and air sealing. SPF can be further categorized based on the type of blowing agent utilized in the product. OcSPF uses a reactive blowing agent, water. Added water in the B-side reacts with A-side isocyanates to create CO2 gas. CcSPF and roofing foams use physical blowing agents that transform into a gas during installation due to the exothermic foam reaction that occurs. These physical blowing agents are either hydrofluorocarbons (HFC) or hydrofluoroolefins (HFO). Please note that this declaration only covers HFO formulations for ccSPFand roofing products, as well as reactive (water) blowing agent ocSPF. A complete list of all SPF manufacturers and product covered by this declaration is provided in the Appendix.

Manufacturer legal entity:

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

Manufacturer:

BASF

Country of manufacturer:

USA

Product name:

Spray polyurethane foam insulation for closed cell, with HFO blowing agent

Commercial names:

SealTite CC+, Walltite HFO, Walltite CMxx lines, Heatlok®HFO High Lift, Heatlok® HFO Pro, Ultra-Thane 200, UPC 2.0 HFO, GacoOnePass Low GWP, ProSeal HFO™, FOAM-LOK® FL 2000-4G, JM Corbond IV, InsulStar®, InsulBloc®, Nexseal™ 2.0, Nexseal™ 2.0 LE )

Material type:

Insulation

Material subtype:

PUR (polyurethane foam) insulation

Environmental & technical characteristics

Global warming potential (A1-A3):

160 kg CO2e/m3

Technical specification:

0.022 W/mK, 32 kg/m3 average density

Available units for calculation:

m3, kg, ton, m2

Unique identifier (OCLID):

5d3ddfa08e202b7e23cf37f2

Sustainability data background information

EPD number:

EPD-085

EPD program:

ASTM

Publication year:

2018

Product category rules (PCR):

UL PCR Part B: Building Envelope Thermal Insulation EPD Requirements, 2018

Environmental standard:

EN15804+A1

Verification status:

Third-party verified (as per ISO 14025)

Upstream database:

GaBi