BASF - EPDs - Offers chemicals, plastics, performance products, agricultural solutions, and more.

BASF is a global chemical company, providing a wide range of products and solutions for various industries including chemicals, performance products, and functional materials.

Offers chemicals, plastics, performance products, agricultural solutions, and more.

Website: basf.com

Email: info@basf.com

Phone: +49 621 60-0

Address:

Carl-Bosch-Str. 38, 67056 Ludwigshafen, Germany

Epoxy-based reactive resin, aqueous, 1250 kg/m3, MasterTop TC 485W (BASF)

BASF

2.66 kg CO2e/kg

Polyurethane-based reactive resins, aqueous, 1050-1250 kg/m3, MasterTop TC 407W, MasterTop TC 407WAB, MasterTop TC 408W, MasterTop TC 417W, MasterTop TC 442W (BASF)

BASF

4.66 kg CO2e/kg

Polyurethane-based reactive resins, 1100 kg/m3, MasterTop P 660 (BASF)

BASF

5.87 kg CO2e/kg

Epoxy-based reactive resins, 1050-1150 kg/m3, MasterTop P 615, MasterTop P 617, MasterTop P 617RC, MasterTop P 621 (BASF)

BASF

5.99 kg CO2e/kg

Epoxy-based reactive resins, 1400-1650 kg/m3, MasterTop P 604, MasterTop BC 372, MasterTop BC 372AS, MasterTop BC 372TIX (BASF)

BASF

2.66 kg CO2e/kg

Solvent-free polyurethane-based reactive resin, 1.00 - 1.45 g/cm3,, MasterTop BC 325N, MasterTop BC 325NFLR, MasterTop BC 327FLR, MasterTop BC 361N, MasterTop BC 375N, MasterTop BC 375NAS (BASF Construction Chemicals Europe AG)

BASF Construction Chemicals Europe AG

4.66 kg CO2e/kg

Ready-mix concrete, 2386 kg/m3, Watertight (BASF)

BASF

254 kg CO2e/m3

XPS insulation with flame retardant, 0.033 W/mK, 120 mm, 3.9 kg/m2, 32.5 kg/m3, Lambda=0.033 W/(m.K), Styrodur BMB (BASF)

BASF

3.25 kg CO2e/m2

XPS insulation with flame retardant, L = 0.032 W/mK, 20-200 x 1265 x 600 mm, 28-50 kg/m3, Lambda=0.032 W/(m.K), Styrodur (BASF)

BASF

9.85 kg CO2e/m2

Spray polyurethane foam insulation for closed cell, with HFO blowing agent (incl. A5 installation and B1 use phase impacts), 0.022 W/mK, 32 kg/m3 average density, SealTite CC+, Walltite HFO, Walltite CMxx lines, Heatlok®HFO High Lift, Heatlok® HFO Pro, Ultra-Thane 200, UPC 2.0 HFO, GacoOnePass Low GWP, ProSeal HFO™, FOAM-LOK® FL 2000-4G, JM Corbond IV, InsulStar®, InsulBloc®, Nexseal™ 2.0, Nexseal™ 2.0 LE ) (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

184 kg CO2e/m3

Spray polyurethane foam insulation for roofing, with HFO blowing agent (incl. A5 installation and B1 use phase impacts), 0.022 W/mK, 52 kg/m3 average density, SealTite Roof 60+, SealTite Roof 40+ , Skytite C3 and C4 lines, Ultra-Thane 250/270/300, UPC 2.5 / 2.7/ 3.0 HFO, LPA 2500-4G, EnduraTech™, Nexseal™ 2.3/3.3 Series (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES)

217 kg CO2e/m3

Spray polyurethane foam insulation for open cell, with HFO blowing agent (incl. A5 installation and B1 use phase impacts), 0.036 W/mK, 15.2 kg/m3 average density, Bayseal,Quadfoam, Foamsulate, Sealtite, Enertite, Sealection® 500, Agribalance®, Demilec APX® 1.2, Sealection® NM, Demilec APX® 2.0, Ultra-Thane 050, UPC 500, UPC 500 HIGH YIELD, UPC 500 MAX, GacoProFill, GacoEZSpray, GacoFireStop2, Gaco 052N,FOAM-LOK® FL400/450/500/750, GacoInsulBarrier (Canada), JM Corbond ocSPF, JM Corbond OCX SPF, Sealite™, Sucraseal™ 0.5, EasySeal.5 (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

44.7 kg CO2e/m3

Spray polyurethane foam insulation for roofing, with HFO blowing agent, 0.022 W/mK, 52 kg/m3 average density, SealTite Roof 60+, SealTite Roof 40+ , Skytite C3 and C4 lines, Ultra-Thane 250/270/300, UPC 2.5 / 2.7/ 3.0 HFO, LPA 2500-4G, EnduraTech™, Nexseal™ 2.3/3.3 Series (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES)

186 kg CO2e/m3

Spray polyurethane foam insulation for closed cell, with HFO blowing agent, 0.022 W/mK, 32 kg/m3 average density, SealTite CC+, Walltite HFO, Walltite CMxx lines, Heatlok®HFO High Lift, Heatlok® HFO Pro, Ultra-Thane 200, UPC 2.0 HFO, GacoOnePass Low GWP, ProSeal HFO™, FOAM-LOK® FL 2000-4G, JM Corbond IV, InsulStar®, InsulBloc®, Nexseal™ 2.0, Nexseal™ 2.0 LE ) (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

160 kg CO2e/m3

Spray polyurethane foam insulation for open cell, with HFO blowing agent, 0.036 W/mK, 15.2 kg/m3 average density, Bayseal,Quadfoam, Foamsulate, Sealtite, Enertite, Sealection® 500, Agribalance®, Demilec APX® 1.2, Sealection® NM, Demilec APX® 2.0, Ultra-Thane 050, UPC 500, UPC 500 HIGH YIELD, UPC 500 MAX, GacoProFill, GacoEZSpray, GacoFireStop2, Gaco 052N,FOAM-LOK® FL400/450/500/750, GacoInsulBarrier (Canada), JM Corbond ocSPF, JM Corbond OCX SPF, Sealite™, Sucraseal™ 0.5, EasySeal.5 (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

40.0 kg CO2e/m3

Spray polyurethane foam insulation for roofing, with HFC blowing agent, 0.022 W/mK, 52 kg/m3 average density, SealTite, Primeseal, Enertite, Walltite, Spraytite, Skytite, TNF Pro ®, Heatlok®, Sealection®, Agribalance®, Demilec APX®, Sealection®, Demilec APX®, FROTH-PAK™, Ultra Thane, UPC, Gaco, HandiFoam®, ProSeal™, FOAM-LOK®, Classic™, JM Corbond, InsulStar®, Sucraseal™ (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024)

3.83 kg CO2e/m2

Spray polyurethane foam insulation - two component low pressure applied, with HFC blowing agent, 0.022 W/mK, 32 kg/m3 average density, SealTite, Primeseal, Enertite, Walltite, Spraytite, Skytite, TNF Pro ®, Heatlok®, Sealection®, Agribalance®, Demilec APX®, Sealection®, Demilec APX®, FROTH-PAK™, Ultra Thane, UPC, Gaco, HandiFoam®, ProSeal™, FOAM-LOK®, Classic™, JM Corbond, InsulStar®, Sucraseal™ (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024)

3.21 kg CO2e/m2

Spray polyurethane foam insulation for open cell, with HFC blowing agent, 0.036 W/mK, 15.2 kg/m3 average density, SealTite, Primeseal, Enertite, Walltite, Spraytite, Skytite, TNF Pro ®, Heatlok®, Sealection®, Agribalance®, Demilec APX®, Sealection®, Demilec APX®, FROTH-PAK™, Ultra Thane, UPC, Gaco, HandiFoam®, ProSeal™, FOAM-LOK®, Classic™, JM Corbond, InsulStar®, Sucraseal™ (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024)

1.42 kg CO2e/m2

Spray polyurethane foam insulation for closed cell, with HFC blowing agent, 0.022 W/mK, 32 kg/m3 average density, SealTite, Primeseal, Enertite, Walltite, Spraytite, Skytite, TNF Pro ®, Heatlok®, Sealection®, Agribalance®, Demilec APX®, Sealection®, Demilec APX®, FROTH-PAK™, Ultra Thane, UPC, Gaco, HandiFoam®, ProSeal™, FOAM-LOK®, Classic™, JM Corbond, InsulStar®, Sucraseal™ (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024)

3.31 kg CO2e/m2

Spray polyurethane foam insulation for roofing, with HFC blowing agent (incl. A5 installation and B1 use phase impacts), 0.022 W/mK, 52 kg/m3 average density, Bayseal, Premiseal, Skytite, Elastospray, FE348, Ultra-Thane, UPC, GacoRoofFoam, LPA, EnduraTech™, SES (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES)

766 kg CO2e/m3

Spray polyurethane foam insulation for open cell, with HFC blowing agent (incl. A5 installation and B1 use phase impacts), 0.036 W/mK, 15.2 kg/m3 average density, Bayseal, Ecobay, Quadfoam, Foamsulate, Sealtite, Enertite, Sealection®, Agribalance®, Demilec, Sealection®, Demilec, Ultra-Thane, UPC, GacoProFill, FOAM-LOK, JM Corbond, Sealite™, Sucraseal™, EasySeal (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

44.7 kg CO2e/m3

Spray polyurethane foam insulation for closed cell, with HFC blowing agent (incl. A5 installation and B1 use phase impacts), 0.022 W/mK, 32 kg/m3 average density, Bayseal, Ecobay, Quadfoam, Foamsulate, Walltite, Spraytite, Heatlok®, Ultra-Thane 230 Wall Foam, UPC, GacoOnePass, ProSeal™, FOAM-LOK, JM Corbond, InsulStar®, InsulBloc® (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

593 kg CO2e/m3

Spray polyurethane foam insulation - two component low pressure applied, with HFC blowing agent (incl. A5 installation and B1 use phase impacts), 0.022 W/mK, 32 kg/m3 average density, Bayseal, Ecobay, Quadfoam, Foamsulate, Walltite, Spraytite, Heatlok®, Ultra-Thane 230 Wall Foam, UPC, GacoOnePass, ProSeal™, FOAM-LOK, JM Corbond, InsulStar®, InsulBloc® (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

994 kg CO2e/m3

Spray polyurethane foam insulation for roofing, with HFC blowing agent, 0.022 W/mK, 52 kg/m3 average density, Bayseal, Premiseal, Skytite, Elastospray, FE348, Ultra-Thane, UPC, GacoRoofFoam, LPA, EnduraTech™, SES (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, General Coatings, Icynene-Lapolla, NCFI Polyurethanes, SES)

176 kg CO2e/m3

Spray polyurethane foam insulation - two component low pressure applied, with HFC blowing agent, 0.022 W/mK, 32 kg/m3 average density, Bayseal, Ecobay, Quadfoam, Foamsulate, Walltite, Spraytite, Heatlok®, Ultra-Thane 230 Wall Foam, UPC, GacoOnePass, ProSeal™, FOAM-LOK, JM Corbond, InsulStar®, InsulBloc® (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

147 kg CO2e/m3

Spray polyurethane foam insulation for closed cell, with HFC blowing agent, 0.022 W/mK, 32 kg/m3 average density, Bayseal, Ecobay, Quadfoam, Foamsulate, Walltite, Spraytite, Heatlok®, Ultra-Thane 230 Wall Foam, UPC, GacoOnePass, ProSeal™, FOAM-LOK, JM Corbond, InsulStar®, InsulBloc® (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

152 kg CO2e/m3

Spray polyurethane foam insulation for open cell, with HFC blowing agent, 0.036 W/mK, 15.2 kg/m3 average density, Bayseal, Ecobay, Quadfoam, Foamsulate, Sealtite, Enertite, Sealection®, Agribalance®, Demilec, Sealection®, Demilec, Ultra-Thane, UPC, GacoProFill, FOAM-LOK, JM Corbond, Sealite™, Sucraseal™, EasySeal (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES))

Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES)

40.0 kg CO2e/m3

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 23.22 kg/m3, Lambda=0.18 W/(m.K), Neopor® Plus (BASF)

BASF

2.81 kg CO2e/m2

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 28.83 kg/m3, Lambda=0.18 W/(m.K), Neopor® Plus (BASF)

BASF

3.49 kg CO2e/m2

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 18.42 kg/m3, Lambda=0.18 W/(m.K), Neopor® Plus (BASF)

BASF

2.23 kg CO2e/m2

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 14.41 kg/m3, Lambda=0.18 W/(m.K), Neopor® Plus (BASF)

BASF

1.74 kg CO2e/m2

Graphite polystyrene (GPS) insulation boards, L = 0.0307 W/mK, R = 1 m2K/W, 30.7 mm, 0.442 kg/m2, Neopor ® F 5200 PLUS GPS, Neopor® F 5300 PLUS GPS (BASF)

BASF

1.48 kg CO2e/m2

Graphite polystyrene (GPS) insulation boards, L = 0.0307 W/mK, R = 1 m2K/W, 30.7 mm (1.21 in), 0.433 kg/m2 (0.98 lbs/m2), 14.416 kg/m3 (0.90 lbs/ft3), Neopor® Plus GPS (BASF)

BASF

1.76 kg CO2e/m2

Graphite polystyrene (GPS) insulation boards, 30.7 mm, R = 1 m2K/W, 14.42 kg/m3, 0.442 kg/m2, F 5200 Plus BMB, F 5300 Plus BMB, Type I (BASF)

BASF

1.55 kg CO2e/m2

Ethylene vinyl acetate (EVA) polymer-based sprayable membrane, 1250 kg/m3, MasterSeal 345 (BASF)

BASF

1.62 kg CO2e/kg

Hardening accelerators, 1.1 -1.18 kg/l, Master X-Seed 100, Master X-Seed 120 (BASF)

BASF

0.675 kg CO2e/kg

Epoxy-based reactive resin, aqueous, 1050-1100 kg/m3, MasterTop P 687WAS (BASF)

BASF

3.30 kg CO2e/kg

Epoxy resin, 1.40 -1.65 kg/l, MasterTop P 604, MasterTop BC 372, MasterTop BC 372AS, MasterTop BC 372ESD, MasterTop BC 372TIX, MasterTop BC 372TIXAS (BASF)

BASF

2.66 kg CO2e/kg

Polyurethane-based reactive resins, 1000-1450 kg/m3, MasterTop BC 325N/BC 327FLR/BC 329/BC 361N/BC 375N/BC 375NAS (BASF)

BASF

4.66 kg CO2e/kg

EPS insulation with flame retardant, L = 0.031 W/(mK), 15 kg/m3, Lambda=0.031 W/(m.K), Neopor Plus BMB (BASF SE)

BASF SE

16.2 kg CO2e/m3

EPS insulation with flame retardant, L = 0.031 W/(mK), 15 kg/m3, Lambda=0.031 W/(m.K), Neopor Plus (BASF SE)

BASF SE

47.6 kg CO2e/m3

Ready-mix concrete, 2385 kg/m3, Diamondcrete R (BASF)

BASF

466 kg CO2e/m3

Mineral-based insulation foam, 28 - 32 kg/m3, Cavipor FTX 1 (BASF SE)

BASF SE

32.4 kg CO2e/m3

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 18.42 kg/m3, Lambda=0.18 W/(m.K), Atlas ThermalStar® GX Neopor® (BASF)

BASF

2.23 kg CO2e/m2

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 14.41 kg/m3, Lambda=0.18 W/(m.K), Atlas ThermalStar® GX Neopor® (BASF)

BASF

1.74 kg CO2e/m2

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 28.83 kg/m3, Lambda=0.18 W/(m.K), Atlas ThermalStar® GX Neopor® (BASF)

BASF

3.49 kg CO2e/m2

Graphite polystyrene (GPS) insulation board, L = 0.18 W/mK, 23.22 kg/m3, Lambda=0.18 W/(m.K), Atlas ThermalStar® GX Neopor® (BASF)

BASF

2.81 kg CO2e/m2