Other manufacturers with similar products
DuPont
68 EPDs
Wienerberger
307 EPDs
Hilti
55 EPDs
EPD: Spray polyurethane foam insulation - two component low pressure applied, with HFC blowing agent, 0.022 W/mK, 32 kg/m3 average density, SealTite, Primeseal, Enertite, Walltite, Spraytite, Skytite, TNF Pro ®, Heatlok®, Sealection®, Agribalance®, Demilec APX®, Sealection®, Demilec APX®, FROTH-PAK™, Ultra Thane, UPC, Gaco, HandiFoam®, ProSeal™, FOAM-LOK®, Classic™, JM Corbond, InsulStar®, Sucraseal™ (Spray Polyurethane Foam Association (SPFA), (Accella, BASF, Demilec, General Coatings, Gaco-Western, Icynene-Lapolla, Johns-Manville, NCFI Polyurethanes, SES) (2024))
Spray polyurethane foam (SPF) is made on the jobsite by combining polymeric methylene-diphenyl diisocyanate (pMDI/MDI or A-side) with an equal volume of a polyol blend (B-side). Sides A and B react and expand at the point of application in the building envelope to form polyurethane foam. The formed-in-place SPF provides both thermal insulation and air sealing to the building. Four classes of SPF with varying performances and applications are assessed in this declaration. Closed-cell spray foam for roofing systems (Roofing) is used on the external surface of low slope roofs. Its higher density provides additional compressive strength needed for roofing applications. Two-component, low pressure foam (2K-LP) is a closed-cell product that provides air sealing, insulation, and sound dampening properties. Closedcell, or medium density foam, (ccSPF) provides a water-resistant insulation, air-sealing, water vapor control and delivers added structural performance to the building envelope. Open-cell low-density spray foam (ocSPF) provides insulation and air sealing. SPF can be further categorized based on the type of blowing agent utilized in the product. OcSPF uses a reactive blowing agent, water. Added water in the B-side reacts with A-side isocyanates to create CO2 gas. CcSPF, 2KLP, and roofing foams use physical blowing agents that transform into a gas during installation due to the exothermic foam reaction that occurs. These physical blowing agents are either hydrofluorocarbons (HFC) or hydrofluoroolefins (HFO). Please note that this declaration only covers HFC formulations for ccSPF, 2K-LP, and roofing products, as well as reactive (water) blowing agent ocSPF. A complete list of all SPF manufacturers and product covered by this declaration is provided in the Appendix. SPF products are commonly used in residential, light commercial, commercial, institutional, and certain industrial applications. Typical SPF properties are shown in Table 1.
texas, virginia, USA, 
canada