Manufacturer page.

The declared product of HIT-RE 500 V3 is a two-component system. The resin component (component A) comprises a resin based on epoxides as well as mineral fillers. The curing agent component (component B) comprises of amine hardener, mineral and cement-like fillers. Mixing the two components A and B in the static mixer initiates the curing (hardening) reaction of both binder systems. During the curing phase, a very strong bond is formed between the organic and inorganic binder matrix. The system formed during curing results in a cross-linked duromer with desired design properties (high bond strengths within defined curing time) and particular long-term stability. Composite foils are used for the two-component foil pack of HIT-RE 500 V3. This kind of packaging serves the following purposes: waste volume reduction, easy storage and transport, less packaging material. Through legislation and increased public awareness users have increasingly become discerned towards the use of highly volatile components with their resulting unpleasant odour and low flash point (flammability). The reaction resins used in all Hilti adhesives are practically odourless and have a considerably higher flash point, i.e. higher than 100 °C in comparison to 34 °C for styrene-based products. HIT-RE 500 V3 is the high-performance injectable hybrid mortar with approvals for rebar connections and heavy- duty anchoring. For the placing of the product on the market in the European Union / European Free Trade Association (EU/EFTA) (with the exception of Switzerland) the Regulation (EU) No. 305/2011 (CPR) applies. The product needs a declaration of performance taking into consideration the following European Technical Approvals ETA 16/0142 ETA 16/0143 ETA 16/0180 ETA 18/0745 ETA-18/1022 ETA-19/0194 ETA-20/0125