Other manufacturers with similar products
Manufacturer page.EPD: Wooden I-beams with fiberboard or OSB core and double side LVL or solid wood flange blocks, 7.38% moisture content, 4.4 kg/m, 619 kg/m3, 160 - 500 mm height, STEICOwall, STEICOjoist (Steico)
STEICOwall and STEICOjoist I-joist products are industrially manufactured products for load-bearing and non load-bearing constructions where a thin high load-bearing hardboard (hard fibre joist) or OSB (oriented strand board) web connects two STEICO LVL R or solid timber flanges. The LVL (laminated veneer lumber) flanges comprise several layers of conifer veneer glued together. The natural wood defects, e.g. knots, are reduced to the individual veneer sheet during the production process and are distributed evenly across the cross-section during layup. This produces an almost homogeneous crosssection of high strength and rigidity. The STEICOwall and STEICOjoist I-joist products are identical in terms of manufacturing. They differ in terms of application depending on the type of load. Directive (EU) No. 305/2011 (CPR) applies for placing the products on the market in the EU/EFTA (except Switzerland). STEICO I-joist products require a Declaration of Performance based on the /ETA- 06/0238/ and CE marking (certificate of constancy of performance /No. 0672-CPR-0425/ Material Testing Institute (MPA) at the University of Stuttgart). The respective national regulations apply for usage.
poland